- GSM alarm system[5]
- Alarm[12]
- Hair Steamer[2]
- Face & Body Mask[1]
- Contact Person : Mr. randy orton
- Company Name : China SD Technology Co., Ltd
- Tel : 86-755-21678090
- Fax : 86-755-26498273
- Address : guangdong,shenzhen,nanshan
- Country/Region : China
- Zip : 518055
house alarm system
Introduction
The PATROL HWAK alarm system adopts SMS data transmission and voice platform of GSM network to send control command and receive alarm remotely. The system can be set delayed-arm. When a signal is detected by detectors, the detectors will send alarm signal to host immediately, then the host sends alarm SMS to its pre-set mobile phone numbers, and meanwhile dials its pre-set telephone/mobile phone numbers automatically and drive wiretap. In addition, users can dial the system and set it in arm/disarm mode by any remote phones.
Main Function
SUPPORT WIRED AND WIRELESS DETECTORS
* Adapt wavecom double frequency GSM module.
* 9 wireless guarding zones( 1 SOS alarm zone, 1 fire alarm zone, 1 external power failure alarm zone, the other 6 wireless guarding zones can be defined by user), 2 hardwire guarding zones.
* Send SMS to 3 mobile phones automatically while alarming.
* Call 3 phones automatically while alarming and drive wiretap.
* Arm/disarm by wireless keyboard, remote controller, SMS or remote telephone/mobile phone.
* Set the host by wireless keyboard, SMS or remote phone.
* Report guarding zones remotely by SMS or voice.
* Modify the name of wireless guarding zones and inquire the status of host by SMS demand.
* With voice reminder while the host is working.
* Support dialog.
* With standby rechargeable battery.
* The alarm host automatically stores system status, while its power is off.
* Connect with the alarm center through GSM network.
Specification
* Zone
2 hardwire, 8 wireless
Working frequency between detector and alarm host (
* GSM
GSM frequency: 900/1800MHz & 850/1900MHz (optional)
The GSM frequency of Model No. G10E: 900/1800MHz
The GSM frequency of Model No. G10EA: 850/1900MHz
* LED
Eight controller works LED
* External power failure alarm
Start-time: Less than 1s
* Alarm response time
Less than 10s (GSM in normality)
* Power
Power requirements: AC 220V 50Hz (optional)
Power consumption: Less than 3W
Standby battery: DC 8.4V
Standby battery working hours: More than 10 Hours
* Working conditions
Operating temperature: -20 to 60 degree
Humidity: 20% to 95%
* Weight
Net weight:
Gross weight:
* Dimension
Dimension: